PRODUCT DESCRIPTION:

Carmelo Self Leveling is a poured-in-place cement based nonstructural floor underlayment that self-levels and cures to create flat, hard surfaces on interior floors before installation of floor covering.

It is used to level floors, correct construction errors, or as a follow-up to rough-screed projects. Typical applications include commercial, industrial, and residential projects on new construction or restoration over concrete flatwork, nonmoving wood floors, flooring with cutback resin, and other firm porous and nonporous surfaces.

ADVANTAGES:

With our unique mix design and strict Quality Assurance tests and processes, Carmelo Self Leveling has the following advantages:

Self-Levels for easy smooth installations

Highly fluid and pourable reducing installation times

Remains workable for more than 20 minutes with minor agitation.

Not gypsum based

Single component – Requires only the precise amount of water

Rapid Curing – Ready for service in 24 hours

MULTIPLE USES:

Levels rough concrete surfaces

Under tile, carpeting, and hardwood floors

Commercial and Residential structures

Office Complexes

Over Cast-in-Place and precast floors

Where quick turnaround is needed

MIXING INSTRUCTIONS:

Add the Carmelo Self Leveling to the water (not water to material). Mix 3.25 quarts of potable water to a 50 lb bag of material.

Mix with high-shearing action for at least 3 minutes, until a smooth, fluid, uniform and lump-free consistency is reached.

Additional water must not be added during mixing.  The presence of whitish lather on the surface indicates over watering.  If this happens, discard the batch and reduce water slightly in the next batch.

Pour the product over the primed substrate to desired thickness.  Thickness shall be at least 1/8” (3mm) and not greater than 1/2” (13mm).